1. How to connect the sensor with the app?
Open the menu item "My sensors".
Go to top right on "+".
Press and hold the action button of the sensor for approx. 5 seconds.
When the button is released, the LED on the sensor starts flashing rapidly.
The sensor is detected.
Please follow the steps of the installation wizard.
Now you can make various settings:
- Brightness threshold
- Motion Sensor
- Night Mode
Note that the modes can be activated individually or together!
Please click on the diskette at the top right before finishing each setting to save any changes you have made!
Here you can set the brightness threshold, which determines at which brightness the sensor should switch.
As soon as the set threshold value is reached, the controller displays green.
(Attention: the transfer of the value from the sensor to the app can take a short moment)
Please set up the sensor at the location where it will be mounted so that the brightness threshold is set correctly.
If the brightness threshold is set incorrectly, the sensor may not react!
Operate the motion detection according to your wishes!
You can select the duration, sensitivity, brightness and light colour as desired.
In night mode, you can select your preferred light color and brightness.
As soon as the sensor detects that it is night, it switches on the set lighting!
Combination Motion & Night:
It is also possible to implement a combination of motion detection and night mode.
To do this, simply activate both modes in the settings. When night falls, the sensor detects this and switches to night mode. The luminaire shines with an intensity of approx. 20%.
If a movement is detected, the sensor switches the luminaire to 100% intensity for the set time.